What to do if the mining machine cannot connect to the network?

Phenomenon 1: All new machines cannot obtain IP addresses

Solution: a. Check whether DHCP is enabled on the network. It must be enabled.

b. Check whether MAC binding is enabled on the network. It must be disabled.

c. Check whether the router connection and settings are normal

Phenomenon 2: Some new mining machines cannot obtain IP addresses

Solution: a. Check whether the switch can be connected to the network cable normally

b. Check whether the IP pool range is sufficient

Phenomenon 3: All mining machines cannot mine, the mining machines have obtained IP addresses, and the computers can access the Internet normally

Solution: a. Check whether the network configuration is disabled. A network engineer is needed.

b. Check whether the network operator has closed the mining pool port, which requires a network engineer

c. Check whether the mining pool and miner settings are normal

Phenomenon 4: Some mining machines cannot mine during use

Solution: a. Check whether the router or switch is normal

b. Check whether the power is normal

Phenomenon 5: After the mining machine is moved, the IP cannot be found

Solution: Reset the mining machine.