Achieving 40% overclocking with almost zero noise? Explore the secrets of oil-cooled mining machines

At the beginning of this article, I will summarize the advantages of oil-cooled mining machines: 1.0 dB noise 2. Compared with traditional air cooling, the failure rate is reduced by 90% 3. Overclocking benefits 4. Energy saving 5. Simple construction. You can combine the summary to see how these advantages are achieved.

The video content is as follows:

Hi guys. I'm Brock-Luban. And I'm Norman. So, have you ever worried about the power consumption and noise your machine makes? Today is your lucky day. I'm going to introduce you to a brand new technology, which is called immersion cooling system. What is it? It uses the circulation of oil and water to reduce power consumption and noise. And it can quickly increase the hashrate of your machine ======

Well, today I will be using this Antminer T17+ as an example. As you can see, there are four fans attached to the sides. All you have to do is remove all the screws with this electric screwdriver. So let's get started!

Let's take the top half of this machine off. And we need to unplug these cables because they're connected to these fans. These fans are going to be unplugged. This side is also going to be unplugged. Now we have completed the disassembly of this machine.

Well, let's see how it works. Got it?

So, what are these? These are analog accelerators. The purpose of using this is to make the machine feel the presence of the early fans. Let's put it back.

This little monster is ready. Let's put it in this tank and give it a free bath.

As you can see, this is important. It's called a solenoid. And this is the input port. This is the output port.

So inside the tank, you can see, there's a lot of room for you to put your machine in there. This is the Ethernet cable. And this is the power connector. (The blue part is minus, leaving the blue pipes) And these blue pipes are where the water will flow. There are two fans here. That's pretty much everything inside the tank. I'll tell you how it works later.

All right now. Let's put this machine into this jar.

Here we go. The power connector is here. One side and the other side. And the Ethernet cable is right here.

Ok, that's all taken care of. Now let's pour the dielectric oil into the tank.

Now let's put the dielectric oil into the tank.

Now we need to connect the water pipes to carry the cooling water to the tank. That's it.

Now we need to connect this power connector.

And an Ethernet cable.

Everything is done. Now we will see statistics about the performance of the machine in two days.

That's pretty much all about this machine. See you next time, bye.

Luban Blockchain: https://meta-luban.com/