Bytom BTM Mining Tutorial (UUPool)

BTM Mining Tutorial

1. Get the wallet address

• Deposit addresses of major exchanges

• Mobile light wallet address

• Full node wallet address (bytom.io)

2. Connecting to the mining machine

Now let’s take a look at the connection process of the mining machine:

1. Connect the network cable from the router to the mining machine and insert it into the network cable interface of the mining machine.

2. Insert seven six-pin cables into the PCIE interface of the mining machine (the power cable has ten six-pin cables, you can choose any seven).

3. Connect the power supply and start the machine.

After the power is turned on, the mining machine is just warming up and the noise is low. After about 1 minute of warming up, the mining machine starts to operate normally and the noise becomes louder. It is not recommended to place the mining machine in a general residential area, as the noise will affect living. If you want to place it, please purchase sound insulation equipment.

After the miner is connected to the router, it needs to be searched by network address.

If you are in the same LAN and have only one machine, then directly use a desktop computer or laptop to open the browser, enter: antminer in the browser, enter the login interface, the default account: root, the default password: root

3. Configure the mining machine

Using Antminer B3 for mining

Enter the mining machine backend to configure and enter the "Miner Configuration" interface

Please enter stratum+tcp://btm.uupool.cn:9221 for the mining pool address. Please configure it in the format of "wallet address.miner number", as shown below:

4. Enter the mining pool to view the miner page

Please enter uupool.cn/btm/wallet address in the browser, or enter the wallet address on the www.uupool.cn/btm page to view the miner page. Your miner number will be displayed in the mining pool within 10 minutes after submitting the share normally.