ETH Card Miner Self-Service Solution

Easy miner, creating value for users.

All users of the Claymore 15.0 kernel, regardless of software, operating system, 6G or 8G, A card or N card, will experience failures one after another. We do not estimate the specific time. If failures have already occurred, the kernel needs to be replaced immediately. If failures have not yet occurred, it is recommended to replace it in advance.

His design supports up to block 383#, and with the -eres 0 parameter barely added, it can only be used for a few more days and has no practical significance.

Existing EasyMiner users can switch kernels with one click through the one-click switching function of group control. For the video tutorial, please refer to " How much time are you willing to spend next time? ". Users without group control can install it on any mining machine (only one needs to be installed), or they can install it on a dedicated computer if conditions permit.

We've put together a diagram that brings together all the possible problems you might encounter (click to enlarge).

Here is a brief explanation:

1. For users of the original A card of Easy Miner, if the computing power is abnormal after changing the kernel, it is usually the original BIOS. There are two operations to be done: one is to open the test mode, and the other is to upgrade to version 4.0.0 (some cards may not be upgraded). If the computing power is still abnormal after doing these two operations, please check whether the driver version is between 18.12.3 and 20.4.2. For the original BIOS and those who do not need to use rxboost and automatic timing functions, the driver version is not required.

2. For new Easy Miner users, if the BIOS is original, they also need to set the overclocking parameters (the above steps assume that old users have already set the parameters), usually the core is 1150, the voltage is 800, the video memory is 1950~2200, and the voltage is 900. As shown below:

3. The higher the video memory frequency, the higher the computing power. Devices with poor physical condition may crash or have invalid blocks.

4. Many people who have flashed the BIOS may only need to set the fan speed.

5. The 2015 version of WIN10 (marked in the lower left corner of the picture) cannot use the 20.4.2 version driver, and the 18.12.3 version is recommended.

6. 2G memory (marked in the lower left corner of the picture) cannot use PhoenixMiner kernel

7. The PhoenixMiner kernel may be accidentally deleted by Win's built-in antivirus software, which may cause the kernel to restart once every minute and there will be no computing power. You can check the box to disable the relevant function when installing the software .

The reference hashrate of 8, 478, 488, 578, 588, and 590 cards is between 29 and 32. If the hashrate is abnormal, please check it in time.

9. Ensure that the virtual memory is sufficient. Set the virtual memory to occupy hard disk space. Users who have space are recommended to set it to 6G per card.

10. The 4.0.0 version of EasyMiner has not been upgraded yet, and will be available no later than December 1. Users who need the 4.0.0 version now can upgrade it with one click through the group control (select the version number when upgrading), or re-download the 4.0.0 installation package to overwrite the installation.

-END-